Method Of Using Automatic Soap Dispenser

Method Of Using Automatic Soap Dispenser

Automatic Kitchen Soap Dispenser, also known as Adjustable Classic Foaming Soap Dispenser, Classic Soap Dispenser, can be induction automatic liquid, when in use, open the switch of the soap dispenser, the hand to the liquid dispenser outlet, soap dispenser will sense and automatically receive signal liquid out, reach the set time of liquid out, automatic soap dispenser will stop liquid out.

Use of Automatic Kitchen Soap Dispenser

4. When the soap is not used for a long time, it is easy to form condensation, so you can add appropriate warm water to stir the soap, or clean up the condensed soap in the automatic soap dispenser, then add warm water for cleaning, and finally add new soap.

The use of Classic Soap Dispenser seems simple, but there are also some matters that need attention. The main points for attention in the use of soap dispenser are:
1. The internal soap liquid of the soap dispenser should not be too thick, otherwise it may not be out of the liquid. Therefore, we should pay attention to the viscosity of the soap liquid inside the soap dispenser.
2. The soap liquid inside the soap dispenser should be replaced regularly to avoid deterioration. The dust and impurities of the deteriorated soap liquid may block the outlet and affect the normal use.
3. When using Adjustable Classic Foaming Soap Dispenserto fill liquid at ordinary times, pay attention to ensure that the soap dispenser does not leak liquid before installing it back. If there is leakage, the interface should be connected tightly; If it's still leaking, it's probably damaged and needs to be repaired or replaced.
4. Pay attention to the use of automatic soap dispenser, do not scratch the induction head when cleaning; Avoid using chemical thinners that may discolor the body.
5. When the Classic Soap Dispenser is used for the first time, its inner bottle or pump head may contain some water, which is a normal phenomenon. It may be left when the product is tested before leaving the factory.